Département de Chimie
Permanent URI for this collection
Browse
Browsing Département de Chimie by Title
Now showing 1 - 20 of 338
Results Per Page
Sort Options
Item 2-Hydroxy arylaldéhyde dans la synthèse de colorants azoiques(UMMTO, 2017) Khelil, Lylia; Rahmi, LyndaL'objectif de notre travail consiste en la préparation d'azo-composés, au moyen de la réaction dediazotation de 4-Bromo aniline suivie d'une copulation sur le salicylaldéhyde ou l'un deItem Activation de la Bentonite de Maghnia pour usage pharmaceutique(UMMTO, 2017) Genoun, Narimane; Gada, SadiaL'objectif de notre travail consiste à purifier et activer une bentonite calcique issue du gisement de Maghnia, ceci est réalisable à l'aide d'un agent activant (Na2CO3) pour que cette dernière soit adaptée à un usage pharmaceutique. Les différentes techniques de caractérisations telles que l'analyse de DRX, MEB, IR, la BET ainsi que les tests pharmaceutiques préconisés par la pharmacopée révèlent que le procédé d'activation permettant l'obtention de la Na-Bentonite renforce les propriétés initiales de la bentonite traitée, essentiellement la capacité de gonflement.Item Activation du CO2 sur l'hydroxyapatite(UMMTO, 2019) Arab, HanafiL'hydrogénation du dioxyde de carbone en méthane a été effectuée sur des poudres d'hydroxyapatite (Ca10 (PO4)6OH2). Après une présentation générale sur l'hydroxyapatite et ses propriétés physico-chimiques et sa capacité d'être substituée par divers éléments. De l'hydroxyapatite pure (Ca10(PO4)6OH2) et substituée au zinc éléments (Ca10Zn1(PO4)6OH2) ont été synthétisées par la méthode Co-précipitation. L'étude catalytique des deux poudres dans un réacteur dynamique a montrée une activation assez importante du dioxyde carbone avec la formation du méthane en augmentant la température de réaction. La substitution du calcium par le zinc a améliorée la conversion en méthane montrant une activité exceptionnelle de l'hydroxyapatite. En conclusion, la synthèse de l'hydroxyapatite substituée avec différents ions est intéressante pour la transformation du CO2.Item Activation du CO2 sur l'hydroxyapatite(UMMTO, 2019) Arad, HanafiL'hydrogénation du dioxyde de carbone en méthane a été effectuée sur des poudres d'hydroxyapatite (Ca10 (PO4)6OH2). Après une présentation générale sur l'hydroxyapatite et ses propriétés physico-chimiques et sa capacité d'être substituée par divers éléments. De l'hydroxyapatite pure (Ca10(PO4)6OH2) et substituée au zinc éléments (Ca10Zn1(PO4)6OH2) ont été synthétisées par la méthode Co-précipitation. L'étude catalytique des deux poudres dans un réacteur dynamique a montrée une activation assez importante du dioxyde carbone avec la formation du méthane en augmentant la température de réaction. La substitution du calcium par le zinc a améliorée la conversion en méthane montrant une activité exceptionnelle de l'hydroxyapatite. En conclusion, la synthèse de l'hydroxyapatite substituée avec différents ions est intéressante pour la transformation du CO2.Item Adsorption d'un colorant sur un matériau naturel(UMMTO, 2018) Ait Salem, DjouherDans le présent travail, nous nous sommes intéressés à l'étude de l'adsorption du colorant bleu cibacran (BC), colorant anionique sur les cosses des petits pois, qui sont un adsorbant naturel et disponible. Les essais d'adsorption ont montrés une élimination remarquable dès les 50 premières minutes. L'influence de différents paramètres expérimentaux ont été analysée : pH, masse d'adsorbant, concentration initiale en colorant et température. Les résultats expérimentaux ont montré que l'adsorption du colorant Bleu cibacran sur les cosses des petits pois atteint 95% à et à température ambiante. L'étude de l'isotherme montre que le modèle de Langmuir et Freundlichdécrit bien le processus de l'adsorption du BC sur la poudre des cosses de petits pois.Item Adsorption des composés phénoliques des margines sur des bentonites modifiées(UMMTO, 2011) Sini, KarimaItem Adsorption du bleu de méthylène par un adsorbant magnétique(UMMTO, 2018) Ait Yahia, Cylia; Houali, ThinhinaneL'objectif de notre étude est de préparer des nanocomposites magnétiques et les utiliser dans l'adsorption du bleu de méthylène (BM).Ces nouveaux adsorbants sont les nanoparticules d'oxyde de fer (NP) prises seules ou combinées avec la fibre alfa,qui ont été préparé par précipitation des ions Fe3+ / Fe2+. Les expériences d'adsorption ont été effectuées en mode batch et ont montré que le taux d'adsorption dépend de différents paramètres tels que le temps de contact, le pH, et la concentration initiale de la solution. Sous les meilleures conditions testées, le taux d'adsorption atteint 95.5% pour les Np-fibre alfa.Item Adsorption du chrome(VI) sur la cellulose modifiée(UMMTO, 2015) Guettaf, Ferroudja; Kennas, SadjiaItem Adsorption du Cr (VI) sur la poudre des feuilles d'olivier(UMMTO, 2014) Tatemante, FatmaItem Amélioration du traitement physico-chimique des eaux usées du complexe textile de Draa Ben Khedda par la technique de filtration sur la bentonite(UMMTO, 2016) Cherifi ép. Ouhocine, Djamila; Belfodil ép. Tabti, NadiaItem Analyses physico-chimiques et microbiologiques des eaux à usage pharmaceutique(UMMTO, 2013) Khiar, ChahinezItem Application d'une membrane polymère plastifiée à l'extraction du chrome hexavalent par l'Aliquat 336(UMMTO, 2017) Kaci, AniaL'objectif de ce travail est l'élaboration de deux types de membranes polymères plastifiées (MPP) constituées de polyvinyle chlorure (PVC) de différents poids moléculaires et de triacétate de cellulose (TAC) contenant les plastifiants de type polyéther DNPE, 2-NPOE, 2-FPNPE et un extractant-transporteur basique l'Aliquat 336 que nous avons appliqués à l'extraction et à la récupération du chrome hexavalent à partir d'un milieu H2SO4 2M proche des solutions usées de bains de chromage. Les résultats des expériences d'extraction et de transport ont montré que le transport du chrome (VI) par l'Aliquat 336 est quantitatif et se fait sous forme de la paire d'ions R3(CH3)N+ HCr2O7- à travers les deux types de membranes. La membrane MPP à base de PVC de poids moléculaire le plus faible est la plus efficace des autres membranes à base de PVC et à base de TAC. Le taux (E %) de récupération du chrome (VI) est plus élevé pour le plastifiant DNPE (E= 92 %) >2-NPOE (E= 90%) >>2-FPNPE (E=31 %).Item Item Application des polymères naturels dans le conditionnement des boues et dans la décoloration des eaux(UMMTO, 2014) Aili, DihiaItem Arylation d'heteroarènes via activation / fonctionnalisation de la liaison C-H par catalyseurs a base du Palladium(UMMTO, 2015) Rabhi, FadhilaItem Calcul des spectres magnétiques en volume et en surface des structures Fe et Ni(UMMTO, 2016) Saad, RabahItem Caractérisation des olives et de l'huile d'olive de la Variété Chemlal dans la région de Beni Zmenzer et Freha(UMMTO, 2019) Halli, Karima; Khaldi, SalihaDeux échantillons d'huiles d'olive ont été collectés à partir de deux différentes régions de la wilaya de Tizi Ouzou : Freha et Beni Zmenzer, pour une caractérisation physicochimique et organoleptique. Après extraction dans une unité de trituration, les analyses physico-chimiques et organoleptiques, selon les critères cités dans le Conseil Oléicole International (C.O.I), des huiles ont été réalisées. Des analyses physicochimiques telles que l'acidité libre, l'indice de peroxyde, l'indice d'iode, absorbance dans l'ultra-violet K232, K270, la teneur en eau….etc. Les résultats obtenus confirment que la composition en acides gras influe sur la qualité de l'huile d'olive. L'analyse sensorielle réside en un test effectué sur les échantillons, montre que les huiles appartiennent à la catégorie " huile vierge extra ".Item Caractérisation des eaux des sources de la région de Yakourene. Suivi d'une étude comparative avec les eaux minérales (ifri, Toudja, Lalla Khadîdja)(UMMTO, 2018) Ben Chabane, Taous; Hamdi, SabrinaCette étude a pour but la caractérisation et la valorisation de l'eau des sources (Fontaine Chinoise, ThalaMallel, Fontaine2, Fontaine Fraiche, Fontaine Touizi) situées dans la région de " Yakourene " et localisée ces sources en utilisent le logiciel MapInfo. Pour arriver à terme de cette caractérisation, des prélèvements ont été effectués au niveau de chaque une des sources. Des analyses physico-chimiques ainsi que microbiologiques ont ensuite été réalisés au niveau du laboratoire Taksebt (SEAAL), et ce en comparaison avec l'eau minérale déjà certifie(Lalla Khadîdja, Toudja et ifri). Les résultats physico-chimiques montrent que nos sources sont de bonne qualité et montrent que sont faiblement minéralisées, elles présentent des germes pathogènes dépassent la norme. ? travers de cette étude, le système d'information géographique nous permettra de rassembler, stocker et visualiser toutes les informations recueille.